Charging The Battery - Vivitar Vivicam 3930 User Manual

Charging the Battery

1. Make sure the camera power is off.
2. Slide the battery/SD Memory Card cover into the direction of the [OPEN] arrow.
3. Insert the battery, noting correct polarity (+ and -).
4. Slide the battery lock lever to adjust the battery.
5. Close the battery/SD Memory Card cover.
6. Connect one end of the AC power adapter to the DC IN 5V terminal.
7. Connect the other end of the AC power adapter to a power outlet.
8. Note the LED indicator
Green: Charging has started
Indicator off: Charging has completed
Orange: Stand by
Red: Replace the battery
Note:
Make sure to use only the AC power adapter specified for the camera.
Damage caused by the use of an incorrect adapter is not covered under the
warranty.
If charging does not initiate turn the came on, and then off
Never attempt to charge any battery other than the battery originally included
with the camera.
Never attempt to charge a CP-1 type battery.
Do not charge the camera battery in a high temperature environment. Charge
only at room temperature.
19