Cts1200 230V Bom (Bill Of Materials) - Crown CTs600 Service Manual

138537-3 REV. B
E.C.N REV
INITIAL RELEASE DERIVED FROM 138537-3 REV. 2
A
C938 WAS ROTATED TO 90°
34706 B U100 & U200 WERE 139618-1 (PREPPED PART)
UNLESS OTHERWISE SPECIFIED, THIS PRINTED WIRING ASSEMBLY SHALL MEET
THE SPECIFICATION DESCRIBED IN IPC-A-610_ CLASS 2 STANDARDS.
ROHS COMPLIANCE: THIS PART MUST COMPLY WITH CROWN AUDIO SPECIFICATION 138935
AND ROHS DIRECTIVE 2002/95/EC OR BE DEFINED AS A ROHS APPROVED EXCEPTION.
NOTES:
1. PRINTED WIRING BOARD PART NUMBER
2. SEE 138537-3_B.TIF
3. ALL LEADS SHALL BE TRIMMED TO 0.125" OR LESS.
4. POSITION COMPONENTS AS SHOWN ON COMPONENT MAP.
5. INSTALL CAPTIVE NUTS (A10019-16) TO BOTTOM OF PRINTED WIRING BOARD.
6. COAT BOTTOM SIDE OF ALUMINUM HEATSINK WITH OXIDE INHIBITOR
(SEE COMPONENT MAP).
7. INSTALL SILPAD (132565-2) OVER TO220 DEVICES PRIOR TO INSTALLING HEATSINK (132644-4)
SEE COMPONENT MAP.
8. APPLY KAPTON TAPE (135520-2) TO BOTTOM OF HEATSINK (132644-4) PRIOR TO INSTALLING
HEATSINK. SEE COMPONENT MAP FOR LOCATIONS.
9. COVER TOP SURFACE OF RT101, RT102, RT201, AND RT202 WITH HEATSINK COMPOUND (
PRIOR TO INSTALLING HEATSINK (132644-4).
10. APPLY TAPE 135894-1
11. MOVE R947 OR PREVENT R947 FROM TOUCHING HEATSINK.
12. APPLY TORQUE SEAL (101036-1) TO ALL POTS AFTER FINAL ADJUSTMENT.
13. ALL GRADED POWER TRANSISTORS (102659-1) ON A HEATSINK MUST BE OF THE SAME GRADE.
UNLESS OTHERWISE MARKED IN RED INK BY CM AS A CONTROLLED COPY, COPIES OF THESE DOCUMENTS
INCLUDING ASSOCIATED ELECTRONIC REPRODUCTIONS ARE FOR REFERENCE ONLY
THESE DRAW INGS AND SPECIFICATIONS ARE THE PROPERTY OF CROWN INTERNATIONAL, INC. AND SHALL NOT BE
REPRODUCED, COPIED, OR USED AS THE BASIS FOR THE MANUFACTURE OR SALE OF APPARATUS OR DEVICES
WITHOUT PERMISSION.
DWN JFL 06/07/07 PE
CTs1200 230VAC BOM 138537-3_B.xls
R04.1CDE-004_(Fm) JAW 10/6/01
PWA, CTS1200 230V
REVISION HISTORY
DESCRIPTION
138530-3
FOR SCHEMATIC AND COMPONENT MAP.
TO EMI SHIELD 133415-3
UNCONTROLLED
BP 06/07/07 CM DSV
CROWN AUDIO, INC. ELKHART, IN.
S 6442-8
SEE COMPONENT MAP FOR LOCATIONS.
ECR PENDING
06/08/07
600008
DATE DWN PE CM
06/07/07 JFL BP DSV
07/16/07 JFL BWP DSV
IN 3 PLACES
S 2162-6)
DIST. K
1 OF 26