Table of Contents
Advertisement
Disabling Thermostat
Some jurisdictions and bedroom installations require the
thermostat to be disabled.
1. Partially take out one battery, see Figure 18 Sec.10.
2. Insert the battery while holding down the thermostat button.
The remote screen will display 'Clr' while the button is held
down. See Figure 19 Sec.10.
3. To enable thermostat repeat steps 1-2. The remote screen
will display 'set' while the thermostat button is held down.
Figure 18 Sec.10
Figure 19 Sec.10
Light Control
XG0508-
150204.1
Operation
Fan Speed Control
The fireplace is equipped with optional hot air circulating fans.
The speed of the fans can be controlled by the Proflame
system. The fan speed can be adjusted through six (6) speeds.
To activate this function use the Mode Key, see Figure 8
Sec.10, to index to the fan control icon, see Figure 20 Sec.10.
Use the Up/Down Arrow Keys, see Figure 8 Sec.10, to turn
..
on, off, or adjust the fan speed, see Figure 20 Sec.10. A single
"beep" will confirm reception of the command.
.
Figure 20 Sec.10
Accent Light Control
The fireplace is equipped with variable accent lights. The
accent light function controls the Accent Lights. To activate this
function use the Mode Key, see Figure 8 Sec.10, to index to
the accent light icon, see Figure 21 Sec.10.
Pressing the Up Arrow Key will turn the light on at the lowest
setting. Continue pressing up to get brighter. Pressing the
Down Arrow Key will turn the lights down until you get to the
off position. A single beep will confirm the reception of the
command.
Figure 21 Sec.10
I-Series Indoor Gas Fireplace
Fan Speed Control
Light Control
Page 47
Advertisement
Table of Contents
