Table of Contents
Advertisement
I-Series Indoor Gas Fireplace
Installation
Leveling the Unit
This unit has 4 leveling screws, 2 located inside the rear of the
firebox and 2 located at the bottom front of the Rear Faceplate.
Once the unit is in position, you can use a Phillips screw driver or
Slotted screw drivers to adjust each leveling screw as required.
1). Remove burner, see section on burner removal and install
2). Rear leveling screw adjustment (Linear burner version shown)
Figure 4 Sec.8
3). Front leveling Screw adjustment (Linear burner version shown)
Figure 5 Sec.8
4). Reinstall the burner.
Page 31
XG0508-
150204.1
Advertisement
Table of Contents
