Disabling Thermostat; Fan Speed Control - Montigo Phenom L38FSDN Installation & Maintenance Manual

See-through indoor gas fireplace
Hide thumbs Also See for Phenom L38FSDN:
Table of Contents

Advertisement

Disabling Thermostat
Some jurisdictions and bedroom installations require the
thermostat to be disabled.
1. Partially take out one battery, see Figure 27k.
2. Insert the battery while holding down the thermostat button.
The remote screen will display 'Clr' while the button is held
down. See Figure 27l.
3. To enable thermostat repeat steps 1-2. The remote screen will
display 'set' while the thermostat button is held down.
XG2021
Figure 27.k
Figure 27.l

Fan Speed Control

The fireplace is equipped with optional hot air circulating fans. The
speed of the fans can be controlled by the Proflame system. The fan
speed can be adjusted through six (6) speeds. To activate this function
use the Mode Key, see Figure 27, to index to the fan control icon, see
Figure 27m. Use the Up/Down Arrow Keys to turn on, off, or adjust
the fan speed. A single "beep" will confirm reception of the command.
Figure 27.m Fan Speed Control
Operation
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phenom l38fsdlPhenom l38fsdniPhenom l38fsdliPhenom l42fsdnPhenom l42fsdlPhenom l42fsdni ... Show all

Table of Contents