Product Maintenance - Chauvet EPIX TILE 2.0 Quick Reference Manual

Table of Contents

Available languages

ÉPIX™ Tile 2.0 QRG

Product

Maintenance

Dust build-up reduces light output and can cause overheating. The ÉPIX™

Tile 2.0 should be kept free of dust with regular cleaning at least once a

month. Usage and environment are contributing factors in determining the

cleaning frequency.

Before cleaning the product unplug it and let it cool to room temperature.

Use a vacuum and a soft brush to remove dust collected on the

external vents.

Clean the external surfaces with a mild solution of non-ammonia

glass cleaner or isopropyl alcohol. Apply the solution directly to a

soft lint-free cloth and wipe the dust to the outside edges of the

product.

Always dry the product's surfaces after cleaning them.

A clean cool operating environment, and gentle handling, will extend the

life of the LEDs.

Dents and scratches around, or in, the tile connectors and connector slots

will make connecting the tile difficult. Exercise caution when loading and

unloading tiles and when connecting and disconnecting tiles.

RJ45 connectors are delicate and the locking tabs can break off if not

handled with care. An RJ45 connector with a broken locking tab does not

create a strong and true connection and should be replaced.

Cat5 twisted shielded pair cable is delicate and should be coiled neatly and

stored with no weight on top of it.

Table of Contents