Chauvet reserves the right to revise the content of this document without any obligation to notify any person or company of such revision, however, Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest version from www.chauvetprofessional.com...
If the box or the contents (the product and included accessories) appear damaged from shipping, or show signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier immediately may invalidate your claim. In addition, keep the box and contents for inspection.
• In the event of a serious operation problem, stop using this product immediately! If your Chauvet product requires service, contact Chauvet Technical Support. Expected LED Lifespan LEDs gradually decline in brightness over time, primarily because of heat. LEDs that are arranged in clusters experience higher operating temperatures than single LEDs.
NTRODUCTION Description The Colorado 1 Quad Zoom is a ruggedly built wash light with seven high output Osram RGBW LEDs. IP rated power and data connectors allow for easy connections. Using IP rated DMX cables allows the fixture to maintain its IP65 rating, but standard 5-pin XLR DMX cables work perfectly for indoor use. A 13° to 45°...
NTRODUCTION Product Overview Power In Power Out Data Out Data In Safety Loop Control Panel Bracket Adjustment Knob Double- Bracketed Yoke Page 5 of 29 Colorado 1 Quad Zoom User Manual Rev. 1...
DMX-compatible products with this product, you can control each individually with a single DMX controller. DMX Personalities The Colorado 1 Quad Zoom uses a 5-pin DMX data connection for the 3-, 4-, 5-, 6-, 7-, 10-, 12-, 17- and 25-channel DMX personalities.
ETUP Master/Slave Connectivity The Master/Slave mode allows a Colorado 1 Quad Zoom (the master) to control one or more Colorado 1 Quad Zoom products (the slaves) without a DMX controller. One Colorado 1 Quad Zoom becomes the master when running an auto or custom program, or by being in a Static mode.
ETUP Procedure The Colorado 1 Quad Zoom comes with a double-bracketed yoke to which you can either attach mounting clamps for hanging or simply use as a floor stand. You must supply the mounting clamps. Make sure the clamps are capable of supporting the weight of this product. Use at least one mounting point per product.
<DOWN> function Control Options Set the Colorado 1 Quad Zoom starting address in the 001-512 DMX range. This enables control of up to 20 products in the 25-channel FULL personality. Programming Refer to the Menu Map to understand the menu options. The menu map shows the main level and a variable number of programming levels for each option.
SC.01 EDIT PR. 1-10 Selects the strobe frequency (0–20 STRB 0-20 Defines the step duration (slow to TIME fast) 0-255 Defines the fade duration (slow to FADE fast) Page 11 of 29 Colorado 1 Quad Zoom User Manual Rev. 1...
Page 15
Defaults CAL to factory settings (Enter Passcode) POS.1 Sets the min/max position of the ZOOM P. 0-255 zoom function POS.2 **Zoom locked to match Colorado 1-Quad Tour series Colorado 1 Quad Zoom User Manual Rev. 1 Page 12 of 29...
Select BASE, POS.1, or POS.2. Set the limit for zoom range POS.1 or POS.2: Go to the ZOOM main level. Select POS.1 or POS.2. Select a zoom limit value (000–255) Page 13 of 29 Colorado 1 Quad Zoom User Manual Rev. 1...
White 5 White 6 White 7 White 8 White 9 White 10 White 11 No function Strobe 0-20 Hz Colorado 1 Quad Zoom User Manual Rev. 1 Page 14 of 29...
Nonlinear dimming curve 4 (slowest) Zoom 0-100% No function Zoom Zoom reset Control No function Colorado 1-Quad Zoom Tour Pixel Selection for DMX Control Page 15 of 29 Colorado 1 Quad Zoom User Manual Rev. 1...
Page 19
Custom 6 Custom 7 Custom 8 Custom 9 Custom 10 0-100% Auto Speed (only when using Auto 1–10 in CH. 13) Colorado 1 Quad Zoom User Manual Rev. 1 Page 16 of 29...
Page 20
White 5 White 6 White 7 White 8 White 9 White 10 White 11 No function Strobe 0-20 Hz Page 17 of 29 Colorado 1 Quad Zoom User Manual Rev. 1...
Page 22
0-100% (Step Duration if Custom 1–10 in CH. 8 is active) 0–100% (Fade Duration if Custom 1–10 in Green CH. 8 is active) Blue 0-100% White 0-100% Page 19 of 29 Colorado 1 Quad Zoom User Manual Rev. 1...
Page 24
Blue 0-100% ARC.1 Channel Function Value Percent/Setting 0-100% Green 0-100% Blue 0-100% Channel Function Value Percent/Setting 0-100% Saturation 0-100% Value 0-100% Page 21 of 29 Colorado 1 Quad Zoom User Manual Rev. 1...
Repeat the settings of colors, effects, and timers for the other scenes. Master/Slave The Master/Slave mode allows a group of Colorado 1 Quad Zoom products (the slaves) to simultaneously duplicate the output of another Colorado 1 Quad Zoom (the master) without a DMX controller.
PERATION Dimmer Profiles This setting determines how fast the output of the Colorado 1 Quad Zoom changes when you modify the values of the red, green, blue, amber, and dimmer faders. This setting provides four different options to simulate the dimming curve of an incandescent lighting product.
PERATION Program Upload This option allows you to copy the custom programs of one Colorado 1 Quad Zoom onto other Colorado 1 Quad Zoom products by using the Master/Slave mode. Configure and connect the products in a Master/Slave arrangement, where the master has the custom programs you want to transfer to the slaves.
Select the desired color or effect (RED, GREN, BLUE, WHIT, STRB, or ZOOM). Select the color or effect value (000-255 for colors and effect, or 00-20 for strobe). Repeat for the other colors or effects. Page 25 of 29 Colorado 1 Quad Zoom User Manual Rev. 1...
Softly drag any dirt or grime to the outside of the transparent surface. Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Colorado 1 Quad Zoom User Manual Rev. 1 Page 26 of 29...
ETURNS ETURNS Send the product prepaid, in the original box, and with the original packing and accessories. Chauvet will not issue call tags. Call Chauvet and request a Return Merchandise Authorization (RMA) number before shipping the product. Be prepared to provide the model number, serial number, and a brief description of the cause(s) for the return.
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., United Kingdom, Ireland, Mexico or Benelux, contact the dealer of record. Page 29 of 29 Colorado 1 Quad Zoom User Manual Rev. 1...