Table of Contents
Advertisement
PIPE THERMOSTAT
Fig.12
The fitting of a pipe thermostat to the flow pipe is
essential in order to activate the water circulation
pump when the water reaches the selected
temperature.
When the water temperature falls below the select-
ed temperature the pipe thermostat will cut off the
water circulation pump in order to allow the boiler to
recover.
Fig.11
HANDOVER
On completion of the installation allow a suitable
period of time for any fire cement and mortar to dry
out, when a small fire may be lit and checked to
ensure the smoke and fumes are taken from the
stove up the chimney and emitted safely to the
atmosphere. Do not run at full output for at least 24
hours.
Ensure that the operating instructions for the stove
are left with the customer. Ensure to advise the cus-
tomer on the correct use of the appliance with the
fuels likely to be used on the stove and warn them to
use only the recommended fuels for the stove.
Advise the user what to do should smoke or fumes
be emitted from the stove. The customer should be
warned to use a fireguard to BS 6539 in the pres-
ence of children, aged and/or infirm persons.
OPERATING INSTRUCTIONS
SUITABLE FUELS
COAL, ANTHRACITE, PEAT, WOOD SYNTHETIC
LOGS, OR OTHER FUELS. "Never use gasoline"
gasoline type lantern fuel, kerosene, charcoal lighter
fluid or similar liquids to start or 'freshen up' a fire in
this heater. Keep all such liquid well away from the
heater at all times. Operate stove only with fuelling
door closed. This heater is hot whilst in operation.
Keep children, clothing and furniture a safe distance
away.
12
Hide quick links:
Advertisement
Table of Contents
