Left, Right, And Front Covers Removal And Fuse Replacement - Epson DFX-8500 Service Manual

DFX-8500

3.2.3.2 Left, Right, and Front Covers Removal and Fuse Replacement

1. Remove 4 screws (CBB, M4×16) securing the left cover, then remove the left cover.
2. Remove the right cover the same way.
3. Disconnect 4 cables from the main power switch in the right cover. (See Figure 3-18.)
Screws (CBB, M4×16)
Screws (CBB, M4×16)
When you attach the right side cover, connect the cable from connector CN1 on the C204 power supply
board unit and the cable from the AC inlet to the main switch in the right cover, as shown below.
3-14
Right and Left Covers
Figure 3-17. Left and Right Cover Removal
ASSEMBLING POINT
Inside Right Cover
AC Inlet Set
C204 Power
Supply Board
Blue cable
Figure 3-18. Cables to the Main Switch
Main Switch
Brown cable
Brown cable
11 12
24 25
Blue cable
Screws (CBB, M4×16)
Screws (CBB, M4×16)