Roller Assembly, Ld, Right/Left Removal - Epson Stylus PHOTO 890 Service Manual

EPSON Stylus Photo 890/1280/1290

4.2.10.2 ROLLER ASSEMBLY, LD, RIGHT/LEFT Removal

1. Remove the ASF Unit. (Refer to Section 4.2.10.)
2. Remove SHAFT, ROLLER, LD. (Refer to Section 4.2.10.1.)
3. Release the hooks in COVER, ROLLER, LD, RIGHT/LEFT (two hooks in each)
fixing itself to LD ASSEMBLY, RIGHT/LEFT, and then remove the COVER,
ROLLER, LD, RIGHT/LEFT.
4. Release the hooks in ROLLER ASSEMBLY, LD, RIGHT/LEFT (two hooks in
each) securing itself to LD ASSEMBLY, RIGHT/LEFT. Then remove ROLLER
ASSEMBLY, LD, RIGHT/LEFT.
Hooks in ROLLER
ASSEMBLY, LD, LEFT
Figure 4-44. Hooks to Release
DISASSEMBLY AND ASSEMBLY
Hooks in COVER,
ROLLER, LD, LEFT
Disassembly Procedures
Compression
Spring, 1.961
COVER, ROLLER,
LD, LEFT
LD ASSY., LEFT
ROLLER ASSY.,
LD, LEFT
Figure 4-45. ROLLER ASSEMBLY, LD, RIGHT/LEFT Removal
C A U T I O N Do not touch the surface of the ROLLER ASSEMBLY, LD with
your bare hands.
Revision C
COVER,
ROLLER, LD,
Compression
Spring, 1.961
ROLLER ASSY,
LD, RIGHT
LD ASSY., RIGHT
106