Removing The Left, Right, And Front Covers And - Epson C117001-N - DFX 5000+ B/W Dot-matrix Printer Service Manual

Removing the Left, Right, and Front Covers and Replacing the
3.2.3.2
1. Remove the 4 CBB (M4 x
2. Remove the right side cover in the same way as you removed the left side cover. Also remove
the 4 cables from the main switch on the right side cover.
Figure 3-11. Removing the Left and Right Side Covers
When you attach the right side cover, connect the cablej%om connector CNI on the Cl17power
supply board assembly and the cable from the AC inlet to the main sun"tch on the right side
cover, as shown below.
AC
Cl
17 pxer wpplybosfd
Figure 3-12. Connecting the Cables to the Main Switch
Rev. A
screws securing the left side cover and remove the cover.
16)
sided
cover
the (R)
side
Light browr
I
11 12
24 25
1 '
. . - - - =
I
1
n
I
Fuse
3-11