Figure 2-96 Hook-Switch Hanger; Figure 2-97 Wall-Mount Screw Guide; Figure 2-98 Mounting The Multiline Telephone - NEC SL1100 Hardware Manual

ISSUE 5.0
2. Remove the switch-hook from the unit. Turn the tab toward the top. Then slide the hook-switch
into position. Refer to
Hook-switch hanger
3. Install two screws into a wall. The screw heads must be remained about 3 mm (0.12").
83.5 mm
(3.287")
4. Mount the telephone on the wall.
Wall-mounting
holes
Hardware Manual
Figure 2-96 Hook-Switch Hanger on page

Figure 2-96 Hook-Switch Hanger

Figure 2-97 Wall-Mount Screw Guide

Figure 2-98 Mounting the Multiline Telephone

2-69.
Hook-switch hanger
3 - 4 mm 1 - 3 mm
(0.12" - 0.16") (0.04" - 0.12")
7 - 9.5 mm
(0.28" - 0.37")
Minimum 10 mm (0.39")
SL1100
Wall side
2-69