Table 2-27 Location Of Controls (Front Side); Table 2-28 Location Of Controls (Back Side); Figure 2-121 Sip Phone - Back View - NEC SL1100 Hardware Manual

ISSUE 5.0
No.
1 Display screen
2 MENU/ EXIT
3 UP
4 SELECT
5 DOWN
6 Programmable speed dial keys
7 Alphanumerical keys
8 CONF
9 MESSAGE key with indicator
10 SPEAKER key with indicator
11 REDIAL
12 VOLUME
13 TRANSFER
14 MUTE key with indicator
15 HOLD key with indicator
Back View
No.
1 LAN port
2 DC Jack
Hardware Manual

Table 2-27 Location of Controls (Front Side)

Name
Displays calls and status information.
Press to access the menu options or cancel your selection and return
to the previous level.
Press to scroll through lists and menus on the display.
Press to enter a menu or confirm a selection.
Press to scroll through lists and menus on the display.
Press any of the keys to speed dial the preset contact number. (To
write something on the sheet, please remove the plastic cover first)
Press these keys to enter phone numbers and texts.
Press to activate the three-way conference call.
Press to listen to voice mail messages.
Red light indicates unheard messages.
Activates the speakerphone to allow hands free conversations.
Press to call the last dialed number.
Press to increase or decrease the volume of the ringer tone, handset,
or speakerphone.
Press to transfer an active call to another phone on the system.
Press to mute MIC.
Press to put an active call on hold.
1

Figure 2-121 SIP Phone - Back View

Table 2-28 Location of Controls (Back Side)

Name
Connects to switch, or hub
DC 6V Power Jack, it is covered by a cap
Description
2
Description
SL1100
2-85