ISSUE 5.0
1.4 Installing the Expansion KSU(s)
1.4.1 General
Each Expansion KSU is connected to the Main KSU individually. The EXIFB-C1 card must be installed
in the Main KSU (1228M-B) .
1.4.2 Unpacking (EXIFB-C1)
Unpack the EXIFB-C1 and check it against physical damage.
Items
EXIFB-C1
1.4.3 Connectors Location (EXIFB-C1)
J1
J2
J3
No.
J1
Expansion Connector (Not used)
J2
Expansion Connector
J3
Expansion Connector
J4
Mother PCB
J5, J6
Debug Purpose (Not used)
1.4.4 Installing the EXIFB-C1 PCB
Do Not Power on until all installations have been completed.
1.
Turn off the system power and disconnect the AC cord from KSU.
Hardware Manual
Table 2-3 EXIFB-C1 Packing List
List of Contents
EXIFB-C1 PCB
J5
Figure 2-11 Connectors of EXIFB-C1
Table 2-4 Connectors of EXIFB-C1
Connectors
QTY
1
J6
J4
Connectable Devices
-
Expansion KSU 2
Expansion KSU 1
J1 connector on 084M-B1
-
SL1100
2-9