Uploading The Measurement Data (Trip Data); Uploading Trip Data - Cateye Stealth evo CC-GL11 Instruction Manual

Uploading the measurement data (trip data)

The trip data generated by the resetting operation can be uploaded to the special website
CATEYE Atlas™ or other services (STRAVA™ and others) in the following procedure.
It is recommended to download trip data to your PC frequently. If too much data is ac-
cumulated, it may take a long time to download or cause a download error.

Uploading trip data

Save the trip data in the computer to your PC, and upload desired trip data to CATEYE Atlas™,
STRAVA™, or TrainingPeaks™.
* The trip data without the resetting operation cannot be recognized with CATEYE Sync™.
Perform the resetting operation of the computer before setting to the cradle.
Watch video
(YouTube)
1
Set the computer to the cradle
Caution: Do not set wet computer to the cradle,
for example after ride in the rain. It
may cause short circuit and damage
the computer or the data.
2
Insert the USB plug into your PC
Only (battery icon) is displayed on the screen.
3
Start CATEYE Sync™
Double-click on the shortcut [CATEYE Sync™] to start CATEYE Sync™.
Click the button, then a browser will open and a
video will be played back.
Computer
Cradle
4
Check that "STEALTH" is selected under Device, and click [Download
All Activities & View Data List]
The trip data is downloaded from the computer to your PC, and the data list screen
appears.
Device
* Trip data successfully downloaded to your PC is deleted from the computer.
* Data under measurement that has not been reset cannot be read.
15