Saving Measurement Data - Cateye Padrone Smart + CC-SC100B Online Manual

1. Switching to Sensor Direct Mode
Switch from Mirror Mode to Sensor Direct Mode.
1. Close Cateye Cycling™ or from
2. From the smartphone search screen, press MODE for 1 second to switch
to Sensor Direct Mode.
* Smart computer will search for a sensor instead of your smartphone. In this mode, the
sensor icon flashes to indicate sensor reception status.
• S (Flash): When the speed signal is received
• C (Flash): When the cadence signal is received
• S/C (S and C flash simultaneously): When the speed/cadence (ISC) sensor signal is
received
• H (Flash): When the heart rate signal is received
• P (Flash): When the power signal is received
Sensor Direct Mode and Mirror Mode measure independently and data has no continuity.
2. Starting/stopping measurement

3. Saving measurement data

Start measurement
Smartphone
Smart computer
Smartphone search
screen
(MENU), turn off [Connect].
(1 second)
Measurement
Important
screen