CHAPTER 3: SETTING UP
ADJUSTING ADJUSTABLE STAYS
• Do not install your machine on a carpet or suchlike grounds.
• To ensure silent and vibration-free operation of your machine, it should be deployed
on a non-sliding and firm ground.
• Loosen the plastic adjustment nut.
• Adjust the stays upward and downward by rotating them.
• After maintaining the balance, compress the plastic adjustment nut upward again.
• Never put cardboard, wood or suchlike materials under your machine if you are intending to
stabilize the distortions on the ground.
• When cleaning the ground, on which your machine rests, be careful not to disorder stays
stabilization.
ENG - 8