CHAPTER 3: SETTING UP
WATER INLET CONNECTION/WATER DISCHARGE CONNECTION
WATER DISCHARGE CONNECTION
• Ensure that water discharge hose is not folded, twisted, crushed or elongated.
• Water discharge hose can be fitted minimum 60 cm and maximum 100 cm above the ground.
• The end of water discharge hose can be fitted to a specificapparatus directly attached to dirty
water discharge hole or outlet joint of the basin elbow.
• Never attempt to extend the water discharge hose by jointing.
• Do not put discharging hose of your machine in a vessel, bucket or sink.
ENG - 10