Cancelling Programme; Finishing Programme - Hyundai WFC 1047 D10 Instruction Manual

CHAPTER 6: OPERATING YOUR MACHINE

CANCELLING PROGRAMME

CANCELLING PROGRAMME
If you want to cancel any programme running:
- Switch the programme knob to 0.
- Your machine will stop the washing operation and the programme will be cancelled.
- To get rid of the water accumulated in the machine switch the programme knob to any
programme.
- Your machine will perform the necessary discharge operation and cancel the programme.
- You can run your machine by selecting a new programme.
CHAPTER 6: OPERATING YOUR MACHINE

FINISHING PROGRAMME

FINISHING PROGRAMME
- Your machine will stop by itself as soon as the programme you have selected finishes.
- Expression of "END" will flash on the electronic display.
Note: Within 2 minutes after the programme has finished, your machine will extinguish
the electronic display to save energy. It will reflash when pressed on a button of any auxiliary
function.
- If you see that the symbol indicating that the door can be opened flashes on the electronic
display, you can open the door of your machine and remove the laundries.
- Leave the door of your machine open to allow the inner part of your machine to dry after
removing your laundries.
- Switch the programme knob to 0.
- Unplug your machine.
- Turn the water faucet off.
ENG - 24