Recommendations; Chapter 3: Setting Up; Removing Transport Safety Screws - Hyundai WFC 1047 D10 Instruction Manual

CHAPTER 2: BEFORE USING YOUR WASHING MACHINE
SAFETY WARNINGS/RECOMMENDATIONS
• You should absolutely remove the transport screws of your machine before the first usage.
Faults occurring in the machines operated with transport screw fitted shall be out of scope
of warranty.
• Do not put discharging hose of your machine in a vessel, bucket or sink.
• Your machine is out of warranty against faults caused by any kind of external factors
(spate, pesticides, fire, etc.).
• The appliance is not intended for use by people (including children) with reduced physical,
sensor yor mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a preson responsible for
their safety. Children should be supervised to ensure that they don't play with the appliance.

RECOMMENDATIONS

• Before beginning to use your washing machine, ask for free-ofcharge help about installing,
commissioning and using your washing machine by calling the nearest authorized service.
• It is recommended to perform the first washing operation in 95º White Cotton
programme and without laundry by inserting ½ scale of detergent in 2
of the detergent drawer.
• As detergent or softener exposed to air for a long time may cause residues, put your ‚
detergent or softener in the detergent drawer in the beginning of each washing.
• It is recommended that you wash only extremely dirty laundries in prewashing programme.
• The amount of laundries you put in your washing machine shall not exceed the maximum
amount indicated. By this way, your machine shall run in saving mode.
• It will help that inner side of your machine will remain dry and no unpleasant smell will occur
provided that you unplug the appliance, turn off the water inlet faucet and leave the door open
or spacedout if you will not use your machine for a long time.
• Some water may be left in your machine due to experiments and tests carried out during
production. This will not damage your machine.

CHAPTER 3: SETTING UP

REMOVING TRANSPORT SAFETY SCREWS

Before operating your washing machine, you should certainly remove the transport safety screw
on the rear side of the machine.
ENG - 6
compartment
nd