Child Lock - Hyundai WFC 1047 D10 Instruction Manual

ENG
Note: If symbol blinks on the electronic display, it means that your machine cannot carry out
the operation of laundry adding or removing as your machine has passed the steps in question.
- Upon completion of laundry adding or removing function, close the door of your machine
and press on Start/Pause button.
- Your machine will continue to wash after locking the door of your machine.
- Symbol will flash on electronic display.
CHAPTER 6: OPERATING YOUR MACHINE

CHILD LOCK

Child lock
To avoid programme flow from being affected if programme knobs are pressed or programme
knob is turned when performing washing operation in your machine, child lock is available.
Child lock will be activated in case pressed on both auxiliary functions of quick washing and
wrinkle removing at the same time in excess of 3 seconds.
Symbol will flash on the electronic display when activated.
If pressed any button while child lock is active, symbol will blink on the electronic display.
When any of the programmes is running and child lock is active, if another programme
is selected after programme knob is switched to 0 position, the programme already running will
resume.
To deactivate it, it will be sufficient to press on the same buttons for more than 3 seconds.
When child lock is deactivated, symbol on the electronic display will go off.
ENG - 23