Starting The Programme; Adding/Removing Laundry - Hyundai WFC 1047 D10 Instruction Manual

CHAPTER 6: OPERATING YOUR MACHINE

STARTING THE PROGRAMME

START/PAUSE BUTTON
- Temperature of washing water
- Revolution speed
- If you have selected, symbols of auxiliary functions
- Programme ending time or programme delay time based on your selection
- Symbol of open or locked door
Note: Symbol for open door flashing on electronic display will go off and symbol for locked door
will flash approximately 1 minute after you start your machine by pressing Start/pause button.
CHAPTER 6: OPERATING YOUR MACHINE

ADDING/REMOVING LAUNDRY

LAUNDRY ADDING TO / REMOVING FROM THE MACHINE
If you want to add or remove laundries when your machine is running:
- Switch your machine to pause mode by pressing on Start/Pause button.
- After a while, if you realize that symbol
the door of your machine will be convenient for opening. When you see symbol
electronic display, you can either add or remove laundries after opening the machine door.
By pressing on Start/Pause button, you may
start the programme you have selected,
suspend a running programme. If you switch
your machine to pause mode, electronic display
will blink.
When you start your machine, the following
symbols for the programmes you have selected
will be available on electronic display.
moves over electronic display, this means that
ENG - 22
on