Extron electronics DTP CrossPoint 84 IPCP Setup Gudie page 17

Command
Recall a preset
Recall a preset
View video and audio mutes
View output mutes
Example:
Lock (Executive) modes
Setting the Front Panel Locks (Executive Modes)
NOTE: See
Lock all front panel functions
Lock advanced front panel functions 2X
Unlock all front panel functions
View lock status
Information requests
Information request
Request part number
Query firmware version
Example:
X1#
NOTE: = Preset
X1$
= Video and audio mute status
X1%
= Lock mode
X1^
= Firmware version number to second decimal place (x.xx)
SIS Command Response
(Host to Unit) (Unit to Host)
X1# X1#]
. Rpr
E } X1$ X1$
VM
1 2
E } ]
VM 0221
on page 17 for more information on the Lock modes.
]
1X
Exe1
]
Exe2
]
0X
Exe0
X1%]
X
I DTPCP84
N
60- nnnn
X1^]
Q
]
Q
1.23
01 through 32
0 = no mutes
1 = video mute
0 = lock mode 0 (unlocked)
Additional Description
Recall preset
X1$ ] X1$
...
4 Each response is the mute status of an output, starting
from output 1.
Output 1 is unmuted. Audio is muted on outputs 2 and 3,
video is muted on output 4.
Enable Lock mode 1.
Enable Lock mode 2.
Enable Lock mode 0.
]
nn ]
See the Extron website for part number.
-
The factory-installed controller firmware version is 1.23
(sample value only).
2 = audio mute
3 = video and audio mute
1 = lock mode 1
X1#
.
2 = lock mode 2 (default)