Service Safety Summary - Xerox ColorQube 8570 Service Manual

Hide thumbs Also See for ColorQube 8570:
Table of Contents

Advertisement

Disconnecting Power
Do not use the on/off switch as a safety disconnect device. The on/off switch is not a
disconnect device. Disconnect the power cord from the supply to isolate the equipment.
DANGER: Ne pas utiliser l'interrupteur comme système d'arrêt d'urgence. Déconnecter
le cordon d'alimentation de la prise pour isoler l'équipement.
AVVERTENZA: Non usare l'interruttore di accensione/spegnimento come dispositivo di
sicurezza per il disinserimento dell'elettricità, in quanto l'interruttore non è stato diseg-
nato per questa funzione. Per isolare la macchina dalla corrente elettrica, scollegare il
cavo dell'alimentazione dalla presa a muro.
VORSICHT: Der Netzschalter reicht zur Trennung von der Netzspannung NICHT aus. Um
das Gerät von der Netzspannung zu trennen, den Netzstecker abziehen.
AVISO: No utilice el interruptor de encendido/apagado como dispositivo de desconex-
ión seguro. El interruptor de encendido/apagado no es un dispositivo de desconexión.
Para aislar el equipo totalmente, desconecte el cable de alimentación de la toma de cor-
riente.
Disconnect the power cord in the following cases:
if the power cord or plug is frayed or otherwise damaged,
if any liquid or foreign material is spilled into the product,
if the printer is exposed to any excess moisture,
if the printer is dropped or damaged,
if you suspect that the product needs servicing or repair,
whenever you clean the product.

Service Safety Summary

General Safety
The printer and recommended supplies have been designed and tested to meet strict safety
requirements. Attention to the following information will ensure the continued safe operation of
the printer.
Electrical Safety
Ensure all ground leads are connected.
DANGER: Vérifiez que tous les câbles de mise à la terre sont bien branchés.
AVVERTENZA: Verificare che tutte le connessioni di messa a terra siano collegate.
VORSICHT: Sicherstellen, dass sämtliche Erdungskabel richtig angeschlossen sind.
AVISO: Asegúrese de que todas las derivaciones a tierra estén conectadas.
Use the power cord supplied with the printer.
Plug the power cord directly into a properly grounded electrical outlet.
Do not use a ground adapter plug to connect the printer to an electrical outlet that does
not have a ground connection terminal.
Do not use an extension cord or power strip.
Do not place the printer in an area where people might step on the power cord.
Do not place objects on the power cord.
Introduction
Power Safety, Service Safety Summary
WARNING
WARNING
Do not block the ventilation openings. These openings are provided to prevent overheat-
ing of the printer.
Do not drop paper clips or staples into the printer.
The power cord is attached to the printer as a plug-in device on the side of the printer. If it
is necessary to disconnect all electrical power from the printer, disconnect the power cord
from the electrical outlet.
Maintenance Safety
Do not attempt any maintenance procedure that is not specifically described in the docu-
mentation supplied with the printer.
Do not use aerosol cleaners. The use of supplies that are not approved may cause poor
performance and could create a hazardous condition.
Do not burn any consumables or routine maintenance items. For information on Xerox
supplies recycling programs, go to www.xerox.com/gwa.
Operational Safety
The printer and supplies were designed and tested to meet strict safety requirements. These
include safety agency examination, approval, and compliance with established environmental
standards.
Pay attention to these safety guidelines to ensure the continued, safe operation of the printer.
Use the supplies specifically designed for your printer. The use of unsuitable materials
may cause poor performance and a possible safety hazard.
Follow all warnings and instructions marked on, or supplied with, the printer, options and
supplies.
Use of other than Genuine Xerox solid ink may affect print and copy quality and printer reliabil-
ity. It is the only ink designed and manufactured under strict quality controls by Xerox for spe-
cific use with this printer. The Xerox Warranty, Service Agreements, and Total Satisfaction
Guarantee do not cover damage, malfunction, or degradation of performance caused by use of
non-Xerox supplies or consumables, or the use of Xerox supplies not specified for this printer.
NOTE: The Total Satisfaction Guarantee is available in the United States and Canada. Cover-
age may vary outside these areas; please contact your local representative for details.
General Guidelines
For qualified service personnel only - Refer also to the preceding Power Safety Precautions.
Avoid servicing alone - Do not perform internal service or adjustment of this printer unless
another person capable of rendering first aid or resuscitation is present.
Use care when servicing with power - Dangerous voltages may exist at several points in this
printer. To avoid personal injury, do not touch exposed connections and components while
power is on. Disconnect power before removing the power supply shield or replacing compo-
nents.
Do not wear jewelry - Remove jewelry prior to servicing. Rings, necklaces and other metallic
objects could come into contact with dangerous voltages and currents.
October 2012
iv
CAUTION
Revised, 3rd Revision - Xerox Internal Use Only
ColorQube 8570/8870 Service Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorqube 8870

Table of Contents