Ford Mondeo Owner's Handbook Manual page 229

K
J
I
H
G
E94973
A Protective cap
B Pressure relief valve
C Hose
D Orange cap
E Bottle holder
F Pressure gauge
G Power plug with cable
H Compressor switch
I Label
Wheels and tyres
A
B
C
D
E
F
227
J Bottle lid
K Sealant bottle
1. Open the lid of the tyre repair kit.
2. Peel off the label I showing the
maximum permissible speed of
80 km/h (50 mph) from the casing
and attach it to the instrument panel
in the driver's field of view. Make sure
the label does not obscure anything
important.
3. Take the hose C and the power plug
with cable G out of the kit.
4. Unscrew the orange cap D and the
bottle lid J.
5. Screw the sealant bottle K clockwise
into the bottle holder E fully tight.
6. Remove the valve cap from the
damaged tyre.
7. Detach the protective cap A from the
hose C and screw the hose C firmly
onto the valve of the damaged tyre.
8. Make sure that the compressor switch
H is in position 0.
9. Insert the power plug G into the cigar
lighter socket or auxiliary power
socket. See Cigar lighter (page 120).
See Auxiliary power sockets
(page 121).
10. Start the engine.
11. Move the compressor switch H to
position 1.
12. Inflate the tyre for no longer than
seven minutes to an inflation
pressure of minimum 1.8 bar (26 psi)
and a maximum of 3.5 bar (51 psi).
Move the compressor switch H to
position 0 and check the current tyre
pressure with pressure gauge F.
13. Remove the power plug G from the
cigar lighter socket or auxiliary power
socket.