Using Basic Functions - Olympus TG-4 Instruction Manual

Using basic functions

Taking photographs ( P mode)
Press the n button to turn on the camera.
1
When the camera is turned on, the monitor will turn on.
Set the mode dial to P.
2
In mode P, the camera automatically
adjusts shutter speed and aperture in
response to subject brightness.
3
Frame the shot.
• When holding the camera, take
care not to cover the flash,
microphone or other important
parts with your fingers, etc.
4
Press the shutter button
halfway down to focus.
The camera was unable to focus
if the AF target mark flashes red.
Try focusing again.
• The shutter speed and
aperture value are displayed
in red if the camera is unable
to achieve optimal exposure.
5
To take the picture, gently
press the shutter button all the
way down while being careful
not to shake the camera.
AF target
P P
Press halfway
1/400 1/400 F6.9 F6.9
Shutter Aperture
speed value
Press the rest of
Press
the way down
halfway
EN 9