Olympus TG-4 Instruction Manual page 60

For the operation method, refer to (P. 42).
Changing the display language d [
Submenu 2
The language for the menus and error messages displayed on
Languages
the monitor is selected.
Setting the date and time d [X]
1 Press FG of the arrow pad to select the year for [Y].
2 Press I of the arrow pad to save the setting for [Y].
3 As in Steps 1 and 2, press FGHI of the arrow pad to set [M] (month),
[D] (day), [Time] (hours and minutes), and [Y/M/D] (date order), and then
press the A button.
• For precise time setting, press the A button as the time signal strikes 00
seconds.
To check the date and time
Press the INFO button while the camera is turned off. The current time is
displayed for approx. 30 seconds.
Choosing home and alternate time zones d [World Time]
• You will not be able to select a time zone using [World Time] if the camera
clock has not first been set using [X].
Submenu 2 Submenu 3
x
Home/
Alternate
z
x*
1 —
1, 2
z * —
*1 In areas where daylight saving time is in effect, use FG (arrow pad) to turn
daylight saving time ([Summer]) on.
*2 When you select a time zone, the camera automatically calculates the time
difference between the selected zone and the home time zone (x) to display
the time in the travel destination time zone (z).
60 EN 60 EN
]
Application
Application
The time in the home time zone (the time zone
selected for x in submenu 2).
The time in the travel destination time zone (the
time zone selected for z in submenu 2).
Select the home time zone (x).
Select the travel destination time zone ( z ).