Live Composite - Olympus TG-4 Instruction Manual

Use FG (arrow pad) to highlight an option and press A to
4
select.
Frame
Start Waiting Time
Interval Time
Time Lapse Movie
• Press the  button repeatedly to exit the menu.
• The interval may be longer than the set interval such as when the camera
takes a few moments for image processing.
• If shooting a time lapse movie over a long period, use the USB-AC adapter
F-3AC (sold separately).
• For the free space on a card, you cannot shoot the set number of frames.
• During interval shooting the power may turn off, but the shooting is still
performed according to the setting.
To cancel the interval shooting
Press the  button.

# Live Composite

1 Press the shutter button halfway down to focus.
• The camera was unable to focus if the AF target mark flashes red.
While the AF target mark is flashing, press the shutter button halfway,
and without releasing this button, then press the A button. The camera
focuses at infinity.
2 To take the picture, gently press the shutter button all the way down while
being careful not to shake the camera.
• The camera configures the proper settings automatically and starts
shooting.
• After pressing the shutter button, there is a time lag until shooting starts.
• A combined panorama image is displayed per certain period of time.
3 Press the shutter button again to stop shooting.
• The recording length in one shooting is up to three hours.
26 EN
Sets the number of frames to be shot between 1 and
99 frames.
Sets the time from pressing the shutter button until
the picture is taken between 00:00:00 and 24:00:00.
Sets the shooting interval for the second and
subsequent frames between 00:00:01 and 24:00:00.
Select [On] to record, besides the still pictures
recorded for each frame, a movie generated from
the sequence of frames.