Olympus TG-4 Instruction Manual page 39

ISO sensitivity Sets the ISO sensitivity.
The camera automatically sets the sensitivity with
l
ISO Auto
priority on image quality.
The camera automatically sets the sensitivity with
m
High ISO Auto priority on minimizing blur caused by a moving
subject or by camera shake.
Set a smaller value to reduce noise in the picture, or
Q to # Value
a larger value to reduce blur.
Sets the sequential shooting function and the
o / Y time from pressing the shutter button until the
picture is taken.
One frame is shot each time the shutter button is
o
Single
pressed.
The images are taken sequentially for 100 frames at
j
Sequential
up to about 5 frames per second (fps) while pressing
down the shutter button all the way down.
The images are taken sequentially for up to
100 frames at about 15 frames per second (fps)
High-Speed1
c
while pressing down the shutter button all the way
down.
The images are taken sequentially for up to
100 frames at about 60 frames per second (fps)
High-Speed2
d
while pressing down the shutter button all the way
down.
The self-timer lamp turns on for approx. 10 seconds,
Y 12 sec
Y 12 then blinks for approx. 2 seconds, and then the
picture is taken.
The self-timer lamp blinks for approx. 2 seconds,
Y 2 sec
Y 2
then the picture is taken.
Photographs are taken at "the number of frames,
Custom
Y C
the time from pressing the shutter button until the
Self-timer
picture is taken, and the interval time" which you set.
EN 39