Olympus TG-4 Instruction Manual page 59

For the operation method, refer to (P. 42).
d Settings Menu 2
Adjusting the image processing function d [Pixel Mapping]
• This function has already been adjusted at factory shipping, and no
adjustment is needed right after purchase. Approximately once a year is
recommended.
• For best results, wait at least one minute after taking or viewing pictures
before performing pixel mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.
To adjust the image processing function
Press the A button when [Start] (Submenu 2) is displayed.
• The check and adjustment of the image processing function starts.
Adjusting the brightness of the monitor d [s]
1 Use FG (arrow pad) to adjust the brightness
while viewing the monitor, and then press the A
button.
Playing back images on a TV d [TV Out]
The TV video signal system varies depending on the countries and regions.
Before viewing camera images on your TV, select the video output according
to your TV's video signal type.
Submenu 2 Submenu 3
NTSC
NTSC/PAL
PAL
480p/576p
HDMI Out 720p
1080i
Off
HDMI Control
On
• For the connection method, refer to "Viewing camera images on TV" (P. 76).
s
Application
Connecting the camera to a TV in North America,
Taiwan, Korea, Japan, and so on.
Connecting the camera to a TV in European
countries, China, and so on.
Set the signal format to be given priority. If
the TV setting does not match, it is changed
automatically.
Operate with the camera.
Operate with the TV remote control.
Back MENU
EN EN 59 59