Olympus TG-4 Instruction Manual page 74

Using GPS function (GPS Settings)
1
Select [GPS Settings] in the d Settings Menu 3 (P. 64) and press
A.
Select [GPS] and press A.
2
Select [On] and press A.
3
• G flashes during measurement. When
the position measurement ends, G will
appear and the position information will be
displayed.
• Once the position measurement has ended,
position information will be added to the
pictures at the time of shooting.
• Do not cover the GPS antenna with your hands or metal objects.
• If you are using the GPS function for the first time and the A-GPS has not
been updated, or if the function has not been used for a long time, it may take
a few minutes for the position measurement to end.
• Latitude and longitude are displayed on the shooting screen. If you do not
wish to add position information, set [GPS] to [Off].
• Position information is not added to movies.
• When the [GPS] is set to [On], the battery will run down faster.
Using the electronic compass (Measurement position information
screen)
1 Press and hold the INFO button while the shooting screen is displayed.
• A measurement position information screen appears.
Back
MENU
LOG
Latitude/Longitude
N123°56' 78''
E123°56' 78''
Barometer
1
880hpa
Altitude/Water Depth
1200m
2015/02/26
12:30
2
OK
Updated 1 min ago Update GPS
• The displays change in the order of Normal
Measurement position information each time the INFO button is pressed.
74 EN
P P
4 4 N
ORM
3 1 Electronic compass
4
2 Update status
5
3 GPS tracking active
6
4 Latitude
7
5 Longitude
8
6 Atmospheric/Hydraulic pressure (P. 61)
7 Altitude/Water depth (P. 61)
8 Current date and time
Detailed No info.
i
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
16
M
4:3
0:34 0:34
GPS