The 0K Memory Adapter; The 0K Memory Adapter (With No Foil Backing) - DEC DECstation 316+ Service Manual

3–18 FRU Replacement

3.2.11 The 0K Memory Adapter

One 0K Memory Adapter is included as standard equipment with
each DECstation, and is installed in the front connector of slot 2
(Figure 3–8).
NOTE
The front connectors of both slot 1 and slot 2 are dedicated
for use with 0K Memory Adapters. If the system includes a
second 0K Memory Adapter (optional), it must be installed
in the front connector of slot 1.
NOTE
Early boards were factory installed in slot 1 and had a
foil backing with a tab that was grounded to the chassis.
Replacement boards may not include this foil backing. If a
board is equipped with the foil backing do not remove the
foil backing.
LJ-1719
Figure 3–8

The 0K Memory Adapter (With no foil backing)