Warmer Setup - GRAUPNER POLARON PRO Operating Manual

19.3 Warmer setup

Connect the warmer to the 4mm banana charge socket. Tap the WARMER icon to access the warmer setup mode. This
page has 2 menus.
1) Battery Warmer
At low temperatures, lithium type batteries tend not to perform well. This function is used to warm up the batteries to
ensure proper function for batteries stored outdoors. Connect the exclusive battery warmer bag to the charger output
terminal and the temperature sensor connector. Then, program the required parameters.
With bags that can not accommodate a temperature sensor, the temperature can not be controlled
automatically. To ensure a proper temperature, control the voltage to maintain the desired
temperature inside the bag. Caution is warrented as an over voltage setup can cause fires.
Temperature setup
Alarm setup
Alarm rings at the preset time. The charger continue operating.
Tap the STOP button to stop the alarm.
Output voltage setup
With an installed temperature sensor, this function is controlled
automatically. The preset voltage can be outputted for operations
without a temperature sensor.
The temperature setup range is 5-15V
Processing time and temperature
77