Table of Contents
Advertisement
Getting started
Battery installation & charging
After installing the battery, you may be able to make or receive short calls. For
hours before use.
You can keep the battery charged by returning the handset to the telephone
base after use. When the battery is fully depleted, a recharge takes about 12
hours. The average talk time on a fully charged battery is about five hours, and
conditions and age of battery.
1. Insert the plug as indicated.
Be sure to securely insert
the plug, making sure that it
matches the color-coded label
inside the battery compartment.
4. You may be able to make or receive
short calls. For best performance, place
the handset in the telephone base to
use.
Battery low indicator
telephone base to recharge
when this symbol flashes and
the handset beeps or when
the handset screen displays
NEEDS RECHARGING.
Caution: Use only the supplied rechargeable battery, replacement battery 2422 (SKU 23402, part
number 89-0047-00-00) or equivalent.
website at www.telephones.att.com or call 1 (800) 222-3111. In
Canada dial 1 (866) 288-4268.
2. Place the battery
and wires inside the
compartment.
then
AM
To order a replacement battery, visit our
NOTE: Under normal conditions, the
battery should last around one year. This
may vary depending on usage.
7
3. Slide the battery
compartment cover
up until it clicks.
To replace the battery,
press in and downward
on the tab of the bat-
tery compartment to
open the battery com-
out the old battery
and disconnect it from
the handset. Follow
the instructions on
this page to install and
charge the new battery.
Advertisement
Table of Contents
