Setting Up Your Computer; Connecting To A Power Source - Toshiba PX30 - A Series User Manual

Setting up your computer

NOTE

Connecting to a power source

Your computer requires power to operate. Use the power
cord/cable and AC adaptor to connect the computer to a live
electrical outlet.
TECHNICAL NOTE: You must complete all setup steps
up to and including
page 28 before adding external or internal components
to your computer. These components include, but are
not limited to a printer and memory.
Please handle your computer carefully to avoid scratches
and damage.
Never pull on a power cord/cable to remove a plug from
a socket. Always grasp the plug directly. Failure to follow
this instruction may damage the cord/cable, and/or result
in a fire or electric shock, possibly resulting in serious
injury.
Always confirm that the power plug (and extension cable
plug if used) has been fully inserted into the socket, to
ensure a secure electrical connection. Failure to do so
may result in a fire or electric shock, possibly resulting in
serious injury.
Be careful if you use a multiple connector. An overload on
one socket could cause a fire or electric shock, possibly
resulting in serious injury.
Getting Started
Setting up your computer
"Setting up your software" on
25