Toshiba PX30 - A Series User Manual page 94

94
If Something Goes Wrong
The Windows
System Image Recovery
Windows
specific image provided by the user.
Startup Repair
This feature automates the repair process. The Operating
System will automatically look for problems and repair them
if possible.
Command Prompt
The command prompt is a very powerful tool for advanced
users.
Startup Settings
In previous Operating Systems the majority of the options
found on this menu were available by pressing the
during the Windows
❖
Enable low resolution video mode
Restarts Windows
resolution. This allows you to reset your display settings
in the event they have been improperly set.
❖
Enable debugging mode
Starts Windows
❖
Enable boot logging
Creates a file that lists all the drivers that are installed
during startup
❖
Enable Safe Mode
Starts Windows
services. If the computer starts and runs in Safe Mode,
you will know the Operating System is most likely
working properly and that you should look to third-party
applications or drivers for the source of your problem.
❖
Disable driver signature enforcement
Allows drivers containing improper signatures to be
installed
❖
Disable early-launch anti-malware protection
Allows drivers to initialize without being measured by the
Anti-malware driver
®
operating system is not working
®
will "Recover" the Operating system using a
®
boot process:
®
®
in an advanced troubleshooting mode
®
with a minimal set of drivers and
using your current video driver at low
key
F8