ZyXEL Communications WAP3205 v2 User Manual page 40

Figure 24 Universal Repeater Mode: Wireless LAN > Site Survey
The following table describes the labels in this screen.
Table 19 Universal Repeater Mode: Wireless LAN > Site Survey
LABEL DESCRIPTION
Station Site Survey
# Select a wireless device and click Setting to go to the Universal Repeater screen with
the selected wireless device's wireless setttings configured. You then just need to enter the
security key (if required) and click Apply in the Universal Repeater screen to connect to
the selected wireless device.
SSID This displays the SSID of the wireless device.
indicates the wireless device is added to an activated profile and the WAP3205 v2 is
connecting to it.
BSSID This displays the MAC address of the wireless device.
Signal Strength This displays the strength of the wireless signal. The signal strength mainly depends on the
antenna output power and the distance between your WAP3205 v2 and this device.
Channel This displays the channel number used by this wireless device.
Encryption This displays the data encryption method used by this wireless device.
Authentication This displays the authentication method used by this wireless device.
Network Type This displays the network type (In (Infrastructure) or Ad Hoc) of this wireless device.
Rescan Click this button to search for available wireless devices within transmission range and
update this table.
Setting Select a wireless device and click this button to have the WAP3205 v2 automatically
configure the selected wireless device's wireless settings in the Universal Repeater
screen.
Chapter 5 Universal Repeater Mode
WAP3205 v2 User's Guide
40