Software - Bunker Hill Security 62463 Owner's Manual & Safety Instructions

Software

Read the ENTIRE IMPORTANT SAFETy INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
IMPORTANT: Set up Network access first according to Connect DVR to Network on
page 28. Keep the Ethernet Cable connected to the DVR at all times.
CPU
RAM
Operating
System
Disk Space
Surveillance Client
Note: Some antivirus programs or firewalls may prevent full installation.
1. Insert Software CD into computer.
2. Open Software for PC or Software for Mac folder.
3. Open Surveillance client folder.
4. Install Surveillance Client.
5. A wizard will open, click Next.
6. Click Add Device.
Figure AQ
7. Fill in Device Name: Find Device Name on
DVR in System>Info. For inputting numbers,
use regular keyboard numbers, NOT keypad.
8. Use Static IP Address or DDNS
Host Name for IP/ID.
9. Change Media Port to 3000.
10. Enter User Name and Password for DVR.
Page 32
Intel Pentium 4 or higher, 3GHz
Min. 2GB
Windows XP Professional ® , Windows Vista ® ,
Windows 7 ® , Windows 8 ®, Windows 10 ®
Min. 10GB
For technical questions, please call your Internet Service Provider.
System Requirements
11. Click Add, then click Import All. Your
DVR and all Channels will be visible.
12. Go to Main View.
13. Open the Channels by double-clicking
Default Group, then double-clicking DVR.
14. Double-click each Channel to see
cameras in Live View.
15. Consult PC Surveillance Client
Instructions for further instructions.
Figure AR
Item 62463