Access Dvr With Smartphone - Bunker Hill Security 62463 Owner's Manual & Safety Instructions

4. View Network information:
a. On PC:
• Click on Start menu, then click Run.
• Type "cmd" then click OK.
Figure AL
• Type "ipconfig" then press Enter.
Figure AM: cmd
• You will see the router's Local Area Connection.
FIGURE AN: IPCONFIG

Access DVR with Smartphone

IMPORTANT: Set up network access first according to Connect DVR to Network on
page 28. Keep the Ethernet Cable connected to the DVR at all times.
1. Using your phone's QR code scanning app, scan
the code for your Smartphone's operating system:
a. IOS will open ITunes app store to RXCamLink.
b. ANDROID will open Google Play
app store to RXCamLink.
2. Install and open RXCamLink app.
3. Go To Device Manager and click
4. Give DVR any Device Name.
Item 62463
+ to add DVR.
IOS
For technical questions, please call your Internet Service Provider.
b. On MAC:
• Click on .
• Go to System Preferences.
• Click on Network.
5. Fill in the Chart with information from
ipconfig (PC) or Network (MAC).
Note: If any address has single digit
sets (Example, 192.168.1.12), change to
triple digits (Example, 192.168.001.012).
IP(v4) Address
Subnet Mask
Default Gateway or Router
6. On DVR, go to Network > Network:
a. Leave Type set to Static.
b. Set Client Port to 03000.
c. Set HTTP Port to 03001.
d. Set IP(v4) Address to one from Chart,
change last 3 digits to 200.
IP(v4) Address 192.168.001.012 200
e. Set Subnet Mask and Gateway
to ones from Chart.
f. Set DNS1 to the same as Gateway.
g. Enable Auto Port Forwarding.
h. Click Apply and OK, then Exit.
i. Right click on screen and DVR will
prompt restart. Click OK.
5. Set Login Type to IP/DOMAIN.
6. Click into Address box to the right of
QR Code and type in Static IP Address
or DDNS Host Name from chart.
7. Set Client Port to 3000.
8. Enter User Name and Password for DVR.
9. Click Save and you will see cameras in Live View.
ANDROID
Example
Example
Page 29