Bunker Hill Security 62463 Owner's Manual & Safety Instructions page 31

Network > RTSP
Access DVR using VLC Media Player with RTSP (Real Time Streaming Protocol).
Note: Set up this function only if you
have advanced networking skill.
Network > SubStream - Set Resolution, FPS, Bitrate and Audio
Figure AP
1. Video: Enable is set as default.
2. FPS (Frames per second): Change if desired.
3. Bitrate (Kbps): Change if desired.
Item 62463
4
4
4
4
4
4
4
4
For technical questions, please call your Internet Service Provider.
Changes will be saved when you
click Apply then OK.
Changes will not be saved if you click
Exit or right click on screen.
Click Default to restore default settings.
4. Audio - Check box to record audio if audio
surveillance microphone (sold separately) is hooked
up. (To hook up audio equipment, go to B.
Connect Cameras and Audio on page 9)
Note: Audio is available on Channel
1 and Channel 2 only.
5. Copy: Copy settings from one
Channel to other Channels.
a. Select Channel to copy from.
b. Select Channel to copy to or select ALL.
c. Click Copy, then click OK.
Changes will be saved when you
click Apply then OK.
Changes will not be saved if you click
Exit or right click on screen.
Click Default to restore default settings.
Page 31