Index Search; Time Search; Repeat Playback; Repeat A-B Playback - Sanyo FWDV225F Owner's Manual

3) Press [ENTER].
Playback of the selected scene will start.

Index Search

V V V V S VHS V VHS VHS
Press first.
1) Press [SEARCH].
2) Use [K] or [L] to select a desired index number.
3) Press [0] to Fast Rewinding or [1] to Fast
Forwarding.
4) When the cassette tape has reached an index
mark, playback will start automatically.
Note: The time gap between index marks must be
•
more than 1 minute for SP mode, 2 minutes for
LP mode and 3 minutes for SLP mode.
The index search is not available during recording.
•
Press [STOP C] to stop the search.
•
If a cassette tape ends during a search, the index
•
search will be cancelled and the unit will rewind
to the beginning of the cassette tape.

Time Search

Press
1) Press [SEARCH].
2) Press cursor [1] to highlight the time.
3) Enter the desired time.
Press [0] or [1] to move the digit that you wish to
•
change.
Press [K] or [L] to change the number.
•
4) Press [ENTER].
VHS V V V V S VHS V VHS Press first.
1) Press [SEARCH] twice.
2) Use [K / L] to select a desired time. Then, press
cursor [1] to Fast Forward, or press [0] to Fast
Rewind. When the cassette tape is reaches to the
selected time, playback will start automatically.
Note: For DVD and audio CD, press [CLEAR] to erase
•
the incorrect input at step 3.
For audio CD, the random playback will be
•
cleared when you select time search during
random playback.
For VCR, press [STOP C] to stop the search.
•
For VCR, if a cassette tape ends during a search,
•
the time search will be cancelled and the unit will
rewind to the beginning of the cassette tape.
The time search is not available during recording
•
of the VCR.
EN
ADVANCED PLAYBACK
first.
Title 01 / 06 Chapter 003 / 039 00 : 08 : 10
e.g.) DVD

Repeat Playback

Repeat function is available only during playback.
Each time you press [REPEAT], repeat function changes
as example below.
(Repeat Off)
REP OFF
REP CHAPTER (Current Chapter Repeat)
(Current Title Repeat)
REP TITLE
(Entire Disc Repeat)
REP ALL
(Repeat Off)
REP OFF
REP 1 ( Current Track Repeat)
(Entire Disc Repeat)
REP ALL
(Repeat Off)
REP OFF
( Current Track Repeat)
REP 1
( Current Folder Repeat)
REP DIR
(Entire Disc Repeat)
REP ALL

Repeat A-B Playback

Press
1) During playback, press [A-B] at your desired
starting point as point A.
2) Press [A-B] at your desired ending point as point B.
3) Press [A-B] to exit the sequence so that "A-B
CANCEL" appears.
Note:
Point B should be in the same title or track as
•
point A.
To cancel point A, press [CLEAR] at step 1.
•
Repeat A-B playback is not available with some
•
discs.

Auto Repeat Playback

The unit will automatically rewind the cassette tape when it
has reached the end and will automatically start playback
unless you press [STOP C] or you turn off the unit.
V V VHS V V VHS VHS V S Press first.
1) In stop mode, press [SETUP].
2) Use [K] or [L] to select "AUTO REPEAT".
3) Press cursor [ 1] to "AUTO REPEAT" to set "ON".
4) Press [SETUP] to exit.
Note:
The auto repeat can also be set to "ON" or "OFF"
•
by pressing [REPEAT] on the remote control.
To cancel auto repeat, follow step 1 above. Then,
•
press cursor [ 1] so that "OFF" appears beside
"AUTO REPEAT" . Press [SETUP] to exit.
The auto repeat playback will start automatically
•
if you select "AUTO REPEAT" to "ON" in the
stop mode.
Press first.
first.
17