Optional Settings; Changing The Dvd Settings (In The Setup Menu) - Sanyo FWDV225F Owner's Manual

Changing the DVD Settings (in the setup menu)

In the setup menu, you can customize the various kinds of settings as you prefer.
Refer to the following instructions to navigate through the setup menus.
1
Press [SETUP].
2
Use [0 / 1] to select a setup item.
3
Press [L] to access the highlighted item.
4
Use [K/ L] to go up or down in the menu list.
5
Press [ENTER] to access the sub contents.
6
Use [K/ L] to select a setting.
7
Press [ENTER] to enter.
8
Press [SETUP] to exit.
The following table is the contents which you can set and the default settings. Refer to the table for useful operation.
•
Your change to each setting stays activated even when the unit is turned off.
•
Setup menu (highlight is the default) Contents
TV Aspect
Movie Rating
Password
Default
EN

OPTIONAL SETTINGS

OPTIONAL SETTINGS
Sets the aspect ratio of the playback image to
4:3 Pan & Scan
fit your TV.
4:3 Letterbox
See the note on the right.
16:9 Widescreen
16:9 Squeeze
Sets the rating level for the disc playback.
1 [ALL]
Rating settings allows you to set the rating
2 [NR]
levels of your DVD.
3 [G]
4 [PG] Playback will stop if the ratings exceed the
5 [PG-13]
levels you set.
6 [R]
7 [NC-17]
8 [X-Adult]
Sets the password for "Movie Rating" and
"Default" settings.
– For the first time use.
TV Aspect
Movie Rating
Password
Default
Enter any 4-digit number(except for 4737).
Press cursor [ K] or [ L] to change the
•
number, then press cursor [1].
Press [0] to erase if you input the incorrect
•
number.
When 4-digit numbers are entered, press
•
[ENTER].
– A password has been set already.
( is displayed.)
TV Aspect
Movie Rating
Password
Default
Enter your 4-digit password.
Press cursor [ K] or [ L] to change the
•
number, then press cursor [1].
Press cursor [0] to erase if you input the
•
incorrect number.
When 4-digit numbers are entered, press
•
[ENTER].
Reset to default setting.
Restore
LANGUAGE Menu
SYSTEM Menu
- - - -
- - - -
AUDIO Menu
VIDEO Menu
TV Aspect 4:3 Pan & Scan
Movie Rating 4:3 Letterbox
Password 16:9 Widescreen
Default 16:9 Squeeze
Menu list Sub contents
Notes
Select "4:3 Pan & Scan" for a
•
full height picture with both sides
adjusted.
Select "4:3 Letterbox", black bars may
•
appear on the top and bottom of the
TV screen.
Select "16:9 Widescreen" if a wide-
•
screen TV is connected to this unit.
Select "16:9 Squeeze" to display 4:3
•
aspect ratio in the center of the 16:9
screen when playing back 4:3 images.
The rating level can be changed when
•
a password has not been set yet for
the first time use.
If you have set a password already,
•
"Movie Rating" cannot be selected.
If you forget the password, enter
•
6
"4737" at step , then enter your new
password.
Playback will stop if the ratings exceed
•
the levels you set, it will require you to
enter a password before the disc will
play back.
This function is available only when
•
is displayed.
"Default" is not selected if you have
•
set a password already.
When you do not wish to initialize,
•
press [SETUP] to exit the menu at
7
step .
23