Usb Microphone/Usb Speaker - Olympus DS-30 Instructions Manual

USB Microphone/USB Speaker

It is possible to use the recorder as a USB microphone or speaker with the DSS Player, to
insert/add/overwrite recordings onto voice files downloaded onto a computer, or to save new
recordings directly onto a computer.
In addition, it is also possible to operate the DSS Player using buttons on the recorder.
Audio set up
In order to use this recorder as a USB speaker or a USB microphone in DSS Player, it is
necessary to change to "Audio Class" after connecting to the computer in the "Storage Class"
. When changed for the first time, the driver will be installed into the computer.
After connection, execute the following settings.
Click the
Uses as a USB Speaker
8
When the recorder is being used as a USB
speaker, it is possible to output the sound
through the recorder, rather than from the
speakers attached to a computer.
When using the recorder as a USB speaker,
switch the recorder to the [Audio] mode in
the [Audio Setup] described above, then
perform the following setting.
Select the [Select Audio Output] from the [Tools] in the menu bar, and change
the output destination.
118
icon in the toolbar to change the recorder to Audio device.