Battery Housing Installation; Glass / Door Replacement - Napoleon GDS60-1N Installation And Operating Instructions Manual

40
6.4

BATTERY HOUSING INSTALLATION

EN
ENSURE THE GAS AND ELECTRICAL POWER IS TURNED OFF TO THE APPLIANCE.
APPLIANCE MAY BE HOT, DO NOT SERVICE UNTIL THE APPLIANCE HAS COOLED.
Insert 4 AA batteries (not supplied) into the battery housing supplied, note the polarity of the batteries
A.
and insert as indicated on the cover (+/-). (To open the battery housing slide the back piece upwards
and off of the battery housing).
Attach the wires from the wiring harness of the appliance to the battery housing.
B.
Place the battery housing into the valve compartment below the burner, ensure that the battery
C.
housing is placed in a clean and easily accessible location.
Turn the gas and electrical power back on to begin operating the appliance.
D.
6.5

GLASS / DOOR REPLACEMENT

W415-1328 / A / 01.05.16
WARNING
!
GASKET
GLASS
GLASS
RETAINER
DOOR
FRAME