Paper Feed Problems; Wrong Print Position; Jam 0 - Xerox Phaser 3150 Service Manual
Hide thumbs
Also See for Phaser 3150:
- User manual (152 pages) ,
- Networking manual (42 pages) ,
- Service manual (8 pages)
Table of Contents
Advertisement
Troubleshooting
7.2 Paper Feed Problems
7.2.1 Wrong Print Position
Printing begins at the wrong position on the paper.
Possible Cause
1.
Defective feed sensor.
7.2.2 Jam 0
Fuser
PR
EXIT
Sensor
Possible Cause
1.
Defective solenoid.
2.
Defective feed sensor.
3.
Problem with the MP lift plate and springs.
4.
Defective paper separator pad.
5.
Contaminated or defective pick roller.
7-8
L S U
Toner Cartridge
CR
DR
OPC
SR
PTL
MP Sensor
TR
Feed
FR
Sensor
Empty Sensor
Solution
a.
Replace the defective acutator/sensor.
Description:
Paper does not leave the tray.
Jam0 occurs if the paper is not fed into the printer.
Solution
1.
Use diagnostics to test the solenoid. Replace
the solenoid if defective.
2.
Test the feed sensor. Replace if defective.
3.
Replace the tray if defective.
4.
Clean the pick roller. Replace if defective.
5.
Ensure all rollers are free from debris and
rotating freely.
6.
Check the SMPS, main board and all
connections. Replace any defective parts.
Advertisement
Table of Contents
Troubleshooting
