Smps - Xerox Phaser 3150 Service Manual
Hide thumbs
Also See for Phaser 3150:
- User manual (152 pages) ,
- Networking manual (42 pages) ,
- Service manual (8 pages)
Table of Contents
Advertisement
Disassembly
5.10.1 SMPS
1.
Remove the front cover, see "5.2 Front Cover" on page 5-3.
2.
Remove the rear cover, see "5.4 Rear Cover" on page 5-5.
3.
Remove the top cover, see "5.5 Top Cover" on page 5-6.
4.
Remove the left and right covers, see "5.7 Side Cover (Left and Right)" on page 5-8.
5.
Remove the engine shield assembly, see "5.9 Engine Shield Assembly and Exit Board" on page 5-10.
6.
Remove the 3 screws (one is to ground) securing the inlet bracket and remove the bracket.
Inlet Bracket
7.
Unplug 1 connector from the main board.
8.
Remove the 6 screws securing the SMPS to the shield.
Connector
5-12
SMPS
Advertisement
Table of Contents
Troubleshooting
