("Xx" Represents Alphanumeric Characters.) - Canon MX920 Series Online Manual

Initial Values Set at Factory (Network)
Change wireless/wired
SSID
Communication mode
Wireless LAN security
IP address (IPv4)
IP address (IPv6)
Set printer name*
TCP/IP settings
Enable/disable WSD
Timeout setting
Enable/disable Bonjour
Service name
LPR protocol setting
PictBridge communication
Wireless LAN DRX setting
Wired LAN DRX setting

("XX" represents alphanumeric characters.)

* The initial value in this item varies by machine. You can check the value in this item using the operation
panel on the machine.
LAN settings
Item Initial Values
Disable LAN
BJNPSETUP
Infrastructure
Disable
Auto setup
Auto setup
XXXXXXXXXXXX
IPv4/IPv6
Enable
1 minute
Enable
Canon MX920 series
Enable
Enable
Enable
Enable