Notice For Unplugging The Power Cord - Canon MX920 Series Online Manual

Notice for Unplugging the Power Cord

To unplug the power cord, follow the procedure below.
Important
When you unplug the power cord, press the ON button, then confirm that all the lamps on the
operation panel are off. Unplugging the power cord before all the lamps on the operation panel are
turned off may cause drying or clogging of the print head and print quality may be reduced.
If the power plug is disconnected, the date/time settings will be reset and all documents stored in the
machine's memory will be lost. Send or print a necessary document, or save it on a USB flash drive
before disconnecting the power plug.
1. Press the ON button to turn the machine off.
2. Confirm that all the lamps on the operation panel are off.
3. Unplug the power cord.
The specification of the power cord differs depending on the country or region of use.