Falling Asleep To Music - Sony MHC-DX8 Operating Instructions Manual

Table of Contents

Advertisement

1
Do the procedures for singing along
(steps 1 to 5 on page 33 and 34).
Then, insert a recordable tape in
deck B.
2
Press one of the function buttons
you want to record (e.g., CD).
When you want to record from TAPE A,
press TAPE A/B repeatedly until TAPE
A is selected.
3
Press REC PAUSE/START.
Deck B stands by for recording. The REC
PAUSE/START button blinks.
4
Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
5
Press REC PAUSE/START.
Recording starts.
6
Press nN to start playing the
source to be recorded.
Start singing along with the music.
To stop recording
Press x.
Tips
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
• If you want to record your voice through the
microphone only, you can do so by selecting the
CD function and not playing a CD.
• When high level sound signals are input, the unit
automatically adjusts the recording level to
prevent distortion of the recorded sound signal
(Auto Level Control Function).
Notes
• The instrumental sound may be reduced as well as
the singer's voice when the sound is recorded in
monaural.
• The singer's voice may not be reduced when:
—only a few instruments are playing.
—a duet is being played.
—the source has strong echoes or chorus.
—the singer's voice deviates from the center.
—the voice on the source is singing in high
soprano or tenor.
Falling asleep to
music
— Sleep Timer
You can let the system turn off at the preset
time, so you can fall asleep to the music. You
can preset the time to be turned off by 10
minutes increments.
hH
S
l
L
,
Press SLEEP.
Every time you press the button, the
minute display (the turn-off time)
changes as follows:
AUTO t 90 t 80 t 70
t ... t 10 t OFF t AUTO ...
When you choose "SLEEP AUTO"
The power turns off when the current CD or
tape finishes playback (for up to 100
minutes).
To check the remaining time
Press SLEEP once.
To change the time to turn off
Select the time you want by pressing SLEEP.
To cancel the Sleep Timer function
Press SLEEP repeatedly until "SLEEP OFF"
appears.
SLEEP
s
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents