Sony MHC-DX8 Operating Instructions Manual page 12

Playing a CD (continued)
To
Stop play
Pause
Select a track
Find a point in
a track
Select a CD
in stop mode
Play only the
CD you have
selected
Play all CDs
Remove the CD Press Z OPEN/CLOSE.
Exchange other
CDs while
playing
Adjust the
volume
12
Do this
Press x.
Press X.
Press again to resume play.
During play or pause, press
> (to go forward) or .
(to go back).
Turn SHUTTLE clockwise (to
go forward) or
counterclockwise (to go back)
until it clicks and hold. Release
it when you reach the desired
point (or press and hold down
M or m on the remote).
Press a DISC 1~3 button or
DISC SKIP EX-CHANGE (or
D. SKIP on the remote).
Press PLAY MODE
repeatedly until "CONTINUE
1 DISC" or "SHUFFLE 1
DISC" appears.
Press PLAY MODE repeatedly
until "CONTINUE ALL
DISCS" or "SHUFFLE ALL
DISCS" appears.
Press DISC SKIP EX-CHANGE.
Turn VOLUME (or press
VOL +/– on the remote).
Tips
• You can switch from another source to the CD
player and start playing a CD just by pressing the
DISC 1~3 buttons (Automatic Source Selection).
• If there is no CD in the player, "CD NO DISC"
appears in the display.
• When a disc tray holding a CD is selected (or the
CD in the disc tray is playing) the disc pointer
indicator lights. When a disc tray holding a CD is
not selected, the disc presence indicator lights, but
the disc pointer indicator does not light. When all
disc trays are empty, both the disc presence
indicator and disc pointer indicator light.
Note
When a tray has not been detected by the unit, the
disc pointer indicator may light even though there is
no disc on the tray.